Thank you for purchasing a Nectar Collector,
the next step in the development of vertical dab gear!

Nosotros hope you find this vertical vaporizer as useful and user-friendly as we do.
To help get you started here are a few tips and tricks that we feel volition contribute to your experience; making information technology the best information technology tin can possibly be:

PUTTING Information technology TOGETHER

NECTAR COLLECTORS

NECTAR COLLECTORS

Nectar Collectors

Stride 1: Insert the glass Nectar Collector Mouthpiece into the non-threaded end of the medium sized stainless steel 16mm Connector.

Step 2: Insert the drinking glass and stainless steel spillguard into the inside of one of the big stainless steel connectors.

Step three: Using the other large stainless steel connector, insert the glass diffuser into the within.

Step 4: Insert the Stinger Tip Core into the Non-THREADED stop of the Stinger Tip Connector

Step 5: Screw the Stinger Tip into the threaded end of the stainless steel connector that holds the diffuser

Step vi: Connect the stainless steel connector with the spillguard fastened into the narrow end of the glass Mini Pro Core.

Pace 7: Fill the glass Mini Pro Core, through the open terminate, with h2o to the tiptop of the spillguard on the smaller end.

Step 8: Requite information technology a little shake, to remove excess water.

Footstep ix: Keeping the cadre upside down(spillguard pointing to the sky), place the connector, with the diffuser attached, to the wide opening on the Mini Pro cadre.

Step 10: Screw the double sided Nectar Connector into the connector with the connector with the spillguard.

Footstep 11: Screw the mouthpiece on to the Nectar Connector fastened to the connector with the spillguard.

HONEYBIRD KITS

HONEYBIRD KITS

Honeybirds

Step 1: Insert the glass diffuser into the inside of the large stainless steel connector

Step ii: Insert the Stinger Tip Core into the Non-THREADED end of the Stinger Tip Connector

Step three: Screw the Stinger Tip into the threaded end of the stainless steel connector.

Stride iii: Make full the glass Honeybird Pro Cadre, through the big opening, with h2o to the pinnacle of the spillguard on the smaller cease.

Step 4: Give information technology a little milkshake, to remove excess water.

Step 5: Keeping the cadre upside downward, identify the connector, with the diffuser attached, to the wide opening on the Honeybird Pro cadre.

Step half dozen: Turn it right side upwardly, with the tip downwardly, and you are prepare to go.

PUTTING IT TOGETHER

NECTAR COLLECTORS

NECTAR COLLECTORS

Nectar Collectors

Step 1: Insert the drinking glass Nectar Collector Mouthpiece into the non-threaded end of the medium sized stainless steel 16mm Connector.

Step two: Insert the drinking glass and stainless steel spillguard into the within of ane of the large stainless steel connectors.

Step 3: Using the other large stainless steel connector, insert the glass diffuser into the within.

Step 4: Insert the Stinger Tip Cadre into the NON-THREADED end of the Stinger Tip Connector

Step 5: Spiral the Stinger Tip into the threaded end of the stainless steel connector that holds the diffuser

Stride six: Connect the stainless steel connector with the spillguard attached into the narrow end of the glass Mini Pro Core.

Step seven: Fill up the glass Mini Pro Core, through the open finish, with water to the top of the spillguard on the smaller end.

Footstep viii: Give it a little milkshake, to remove excess water.

Step 9: Keeping the core upside down(spillguard pointing to the sky), place the connector, with the diffuser attached, to the wide opening on the Mini Pro cadre.

Step 10: Screw the double sided Nectar Connector into the connector with the connector with the spillguard.

Stride 11: Screw the mouthpiece on to the Nectar Connector attached to the connector with the spillguard.

HONEYBIRD KITS

HONEYBIRD KITS

Honeybirds

Step 1: Insert the drinking glass diffuser into the inside of the large stainless steel connector

Step 2: Insert the Stinger Tip Cadre into the NON-THREADED end of the Stinger Tip Connector

Stride 3: Screw the Stinger Tip into the threaded terminate of the stainless steel connector.

Step iii: Fill the glass Honeybird Pro Core, through the large opening, with water to the acme of the spillguard on the smaller end.

Stride 4: Give it a lilliputian shake, to remove excess water.

Step five: Keeping the cadre upside downwardly, identify the connector, with the diffuser attached, to the wide opening on the Honeybird Pro cadre.

Step 6: Plough it right side up, with the tip down, and you are set to go.

TIPS & TRICKS

HOW Do I Work THIS THING

What to practise.

HOW Practise I Piece of work THIS Matter

Using the Nectar Collector is very simple. As we like to say, "Merely rut the tip, dip, and sip" but beware, overheat the tip or botch the dip and you might discover yourself in a sticky situation.

GETTING THE WATER IN ... AND OUT

Get it moisture

GETTING THE WATER IN ... AND OUT

All the water cooled Nectar Collectors are filled from the elevation. Fill with h2o about ½ manner up the inside diffuser for optimal percolation.

Fill your water cooled Nectar Collector with the tip removed and make sure there is no water in the lower joint before using. Water trapped in the tip can lead to groovy of the tip or joint or WORSE. Water volition cause a hot glass tip to crack instantly. It is also possible for water dripping into a hot tip to vaporize violently enough to shatter the lower torso of your Nectar Collector. No Bueno …

To remove the water, remove the tip and blow downwardly as difficult as you tin through the mouthpiece. The water will be pushed out through the bottom of the slice.

TIPS FOR YOUR TIP

Heating the tip

TIPS FOR YOUR TIP

Heating the Tip

In one case over again, be sure there is no water trapped in the tip or in the lesser joint of the Nectar Collector. If water drips into a hot tip it can vaporize and shatter the lower body of your slice. To properly oestrus the tip, use a brushing motion with your torch flame and heat the very cease of the tip just. After a few seconds hold the torch steady so that the border of where the blue part of the flame meets the xanthous office of the flame is focused on simply the end of the tip. Gently roll the Nectar Collector back and forth to get an even rut on the terminate of the tip. One time the end of the tip has a faint orange glow stop heating and await … about 3 seconds. If the tip is glowing red yous will be burning, non vaporizing your concentrate. Alert: Practice NOT OVERHEAT THE TIP. Overheating can atomic number 82 to neat of the joint that connects the tip to the Nectar Collector. Near concentrates vaporize betwixt 600 and 900 degrees F. If your tip is glowing carmine hot, it is TOO HOT.

TAKING THE PERFECT Hit

What is the Dip, Sip, & Rip

TAKING THE PERFECT Hit

What is the Dip and Sip?

For best results approach the edge of your concentrate carefully with the hot tip. Going for the center of the pile will cause it to cook and puddle, which could result in your sucking some of your valued resource up into the Nectar Collector without it vaporizing. In add-on information technology will leave your remaining stash tasting less than optimal.

For the Perfect Striking

Brainstorm drawing in air through the mouthpiece before touching the hot tip to the nectar. Lightly bear on the edge of your stash and immediately pull away while standing to inhale. If y'all want a bigger hitting go dorsum right away for another dip and some other and another… WARNING: For those of y'all with more than oil than brains … DO Not SUBMERGE YOUR HOT TIP INTO YOUR STASH JAR AND Endeavor TO Accept THE MOTHER OF ALL RIPS. The concentrate could vaporize violently enough to cause damage to your slice … or you!

CLEANING

To clean your piece, first remove your tip and blow all of the water downwards through the tip joint from the mouthpiece. Subsequently this is done, fill the piece with Formula 710, or your preferred cleaner, and allow the piece to soak for at least one hour. We like formula 710. Salt and rubbing alcohol likewise works well. Be careful if using Elementary Green, we take had it take off decals on a few occasions.

PRO TIP: Gear up the piece vertically in a cup or glass and allow it to soak overnight. Rinse your piece with hot water until the water runs clear. The tip can be completely submerged in the cleaning solution and rinsed the same manner.

WARRANTY

Backing our product

WARRANTY

The Nectar Collector is handmade by human beings. We strive to get information technology correct every time merely occasionally defects in materials and workmanship slip through our quality command arrangement and end up in the hands of our customers. If y'all are not 100% satisfied with your Nectar Collector when you receive it, please contact usa and nosotros will see what we tin can do to make information technology correct. Our mission is the continuous improvement of our product line every bit well as the technique of vertical vaporizing. We are interested in whatsoever feedback from yous our nigh valued customer.

RETURNS & REPAIRS

Shit Happens

RETURNS & REPAIRS

Shit happens… Hither at Nectar Collector we accept seen it all and fixed about of it. Annihilation short of your favorite piece in the earth laying in 100 pieces on your tile floor is probably repairable. Our rates are reasonable and our turnaround time is fast. Let united states know what is broken and we will allow you know what we tin can do.

If y'all demand to return your Nectar Collector for whatsoever reason please visit our Returns and Repairs portal.

TIPS & TRICKS

HOW DO I WORK THIS Affair

What to do.

HOW Exercise I Work THIS Affair

Using the Nectar Collector is very elementary. As we like to say, "Simply rut the tip, dip, and sip" merely beware, overheat the tip or mix-up the dip and you lot might observe yourself in a sticky situation.

GETTING THE WATER IN ... AND OUT

Become it moisture

GETTING THE Water IN ... AND OUT

All the water cooled Nectar Collectors are filled from the tiptop. Fill with water near ½ way up the inside diffuser for optimal percolation.

Fill your h2o cooled Nectar Collector with the tip removed and make sure there is no water in the lower joint before using. Water trapped in the tip can lead to cracking of the tip or joint or WORSE. Water will crusade a hot glass tip to crack instantly. It is also possible for water dripping into a hot tip to vaporize violently enough to shatter the lower body of your Nectar Collector. No Bueno …

To remove the water, remove the tip and blow down equally hard as yous can through the mouthpiece. The water volition be pushed out through the lesser of the piece.

TIPS FOR YOUR TIP

Heating the tip

TIPS FOR YOUR TIP

Heating the Tip

One time once more, be sure at that place is no h2o trapped in the tip or in the bottom articulation of the Nectar Collector. If water drips into a hot tip it can vaporize and shatter the lower body of your slice. To properly rut the tip, use a brushing motion with your torch flame and heat the very finish of the tip just. After a few seconds concur the torch steady so that the border of where the blue function of the flame meets the yellow part of the flame is focused on just the stop of the tip. Gently roll the Nectar Collector back and forth to become an fifty-fifty rut on the end of the tip. Once the end of the tip has a faint orange glow stop heating and look … nigh 3 seconds. If the tip is glowing red yous will be burning, not vaporizing your concentrate. Warning: DO Not OVERHEAT THE TIP. Overheating can atomic number 82 to corking of the joint that connects the tip to the Nectar Collector. Well-nigh concentrates vaporize between 600 and 900 degrees F. If your tip is glowing ruby-red hot, it is Also HOT.

TAKING THE PERFECT HIT

What is the Dip, Sip, & Rip

TAKING THE PERFECT HIT

What is the Dip and Sip?

For best results approach the edge of your concentrate carefully with the hot tip. Going for the center of the pile will cause it to melt and pool, which could event in your sucking some of your valued resource up into the Nectar Collector without information technology vaporizing. In addition it will leave your remaining stash tasting less than optimal.

For the Perfect Hit

Begin drawing in air through the mouthpiece before touching the hot tip to the nectar. Lightly touch the edge of your stash and immediately pull away while standing to inhale. If you want a bigger hit become dorsum right away for another dip and another and another… Alert: For those of you with more oil than brains … Practice NOT SUBMERGE YOUR HOT TIP INTO YOUR STASH JAR AND Attempt TO TAKE THE MOTHER OF ALL RIPS. The concentrate could vaporize violently plenty to cause harm to your piece … or you!

CLEANING

To clean your piece, first remove your tip and blow all of the water down through the tip joint from the mouthpiece. Afterwards this is done, fill the piece with Formula 710, or your preferred cleaner, and allow the piece to soak for at to the lowest degree one hour. We like formula 710. Common salt and rubbing alcohol also works well. Be careful if using Simple Dark-green, we have had information technology take off decals on a few occasions.

PRO TIP: Prepare the piece vertically in a loving cup or glass and allow it to soak overnight. Rinse your piece with hot water until the water runs clear. The tip can be completely submerged in the cleaning solution and rinsed the same way.

WARRANTY

Backing our product

WARRANTY

The Nectar Collector is handmade by human beings. We strive to get it right every time but occasionally defects in materials and workmanship slip through our quality control system and end up in the hands of our customers. If you are non 100% satisfied with your Nectar Collector when you receive it, please contact us and we volition see what nosotros tin do to go far right. Our mission is the continuous improvement of our product line as well equally the technique of vertical vaporizing. We are interested in any feedback from you our most valued client.

RETURNS & REPAIRS

Shit Happens

RETURNS & REPAIRS

Shit happens… Here at Nectar Collector we have seen it all and fixed most of it. Anything short of your favorite piece in the world laying in 100 pieces on your tile floor is probably repairable. Our rates are reasonable and our turnaround time is fast. Let usa know what is broken and nosotros will let you know what nosotros can do.

If you need to return your Nectar Collector for any reason please visit our Returns and Repairs portal.

Frequently Asked Questions

The number that is etched into the slice is the number of that piece. For instance, if you accept an Nectar Collector Mini numbered #1420, you have the 1420th Nectar Collector Mini made. The signature is where Kristian Merwin signs the piece.

Some coils thread into the atomizer counter clockwise and so that when threading the atomizer to the mouthpiece attachment, information technology does not unscrew itself. Be sure to check the threading direction when attaching the coil.

The get-go stride in opening a Wholesale Account with united states of america is to apply through our like shooting fish in a barrel online application located here. We are only offering Wholesale pricing to businesses with a brick & mortar storefront at this fourth dimension.

Let the slice to sit in hot water for a few minutes. This loosens the rest in the articulation and should allow an easier release.

Why Should You lot Season Your Tip?

  • It makes the material stronger & clearer.
  • It will close the pours making the tip very smooth & easy to clean.
  • Information technology makes the tip cleaner by removing whatsoever chemical residue.
  • It will insure a longer life for the tip.
  • Later on seasoning, your tip becomes a proper catalyst for vaporization. Your concentrate'due south will taste much meliorate!

How To Season Your Tip

  1. Use tongs to agree the tip.
  2. Heat the tip for 2 min.
  3. Carefully drop the hot tip in ice h2o.
  4. Remove the tip, dry out thoroughly, & bask!

Note: Your titanium tip will get red & blue in color after seasoning.

Exist careful with solvents! We take discover issues with Unproblematic Dark-green. Do not utilise metal cleaning tools, including steel wool, near the decals.

One time your order has been completed and is ready to send, yous will receive an email notification which will include your tracking number. If you lot do not run across it come up through to your inbox, delight cheque your spam folder equally it may be redirected there.

When proper nectar collecting technique is used: yes (run into above). The oestrus of the tip is well below the wink point of the silicone baking pad fabric and the time that the hot tip is in contact with the fabric is not long enough to cause any off-gassing of the pad. Call back it's dip and sip not hold and suck …

  • To avoid adventitious separation of your tip or mouthpiece from the Nectar Collector body, check for a snug fit BEFORE EVERY Utilize!
  • Exercise NOT OVERHEAT THE TIP! If it'south glowing blood-red, it's too hot. Excessive heating of the tip can lead to cracking of the tip or joint or WORSE.
  • Fill up your h2o cooled Nectar Collector with the tip removed. Water trapped in the tip tin atomic number 82 to smashing of the tip or joint or WORSE.
  • Fill up SLOWLY with water. Filling too quickly volition cause a siphon result which will crusade the h2o to just menstruation through the piece.
  • Make full with h2o about half way up the inside diffuser for optimal percolation.
  • If y'all are having problems filling your Nectar Collector with water; to try to fill information technology from the tip joint rather than the mouthpiece. With some pieces information technology seems to work better that way.
  • To articulate water from the spill proof Nectar Collectors with fixed mouthpieces, remove the tip and blow down through the mouthpiece.
  • To extend the life of your Nectar Collector glass tips, first heat the tip gently by moving the flame in a brushing motility across the tip until information technology has a faint red glow.
  • It is of import to hold the Nectar Collector horizontally while heating to avoid leaks from whatsoever remainder that may be inside the tip.
  • To heat the tip chop-chop and conserve your butane, endeavor heating the tip with the top of the blueish flame where it meets the yellow flame.
  • Just because a tip is croaky doesn't hateful it's broken. Cracks are natural when glass gets heated and cooled over and over.
  • To become the most out of your stash and make it last, draw air through the mouthpiece before putting the heated tip to your nectar.

If you have an old school 14mm ground joint use Joint Wax on footing joints and tips to keep them stuck together when you desire and like shooting fish in a barrel to pull apart when yous're done. Apply a sparse coating of joint wax to the male joint. Gently heat the joint wax using your torch until information technology just starts to melt. Immediately insert into the female person joint and twist back and forth until both surfaces are evenly covered and the joints are set up in place. To take apart simply twist and wiggle the joints apart.